The IEEE-Robotics & Automation Society (RAS) Jt. Washington D.C. and Northern Virginia Chapter cordially invite you to attend a Distinguish Lecture (DL) seminar “Physical Human-Robot Collaboration (pHRC) – Research Challenges and Applications ”, by Professor Dikai Liu from the University of Sydney. There has been increasing interest in the use of intelligent robots that can interact, assist and collaborate with humans. However, a number of key research challenges need to be addressed before robotic systems can be deployed to physically collaborate with human co-workers with varying strengths and in typically unstructured industrial environments. The talk will first discuss challenges of research on physical human-robot collaboration (pHRC), then the development of intelligent robotic coworkers that physically collaborate with humans performing labor intensive tasks such as abrasive blasting and patient handling. Topics include (1) assistance-as-needed paradigm; (2) control methods of robotic co-workers; (3) safety framework for physical human-robot collaboration; (4) brain-robot interface for intuitive human-robot collaboration; (5) modelling of human performance in pHRC; (6) development of robotic co-workers: an Assistance-as- Needed roBot (ANBOT) and a Smart Hoist. Attendees are eligible to receive an IEEE Certificate of Continuing Education Units /Professional Development Hours (CEU/PDH) by attending the full duration of the presentation, completing, and submitting forms at the close of the program. [] Speaker(s): Dikai Liu Agenda: 15:45 – 16:00 Welcome remarks, RAS Chapter Chair 16:00 – 16:45 DL Speaker, Prof. Dikai Liu “Physical Human-Robot Collaboration (pHRC) – Research Challenges and Applications” 16:45 – 17:00 Questions and Answers 17:00 – Closing Remarks / Adjourn Virtual: https://events.vtools.ieee.org/m/446604

Introducing the Arduino IDE and starting practical programming with small projects such as lighting up LEDs, using push buttons, working with RGB LEDs, among others. To support this, we will provide a brief introduction on how to use the breadboard and these components. Additionally, students will be introduced to the online Tinkercad platform so they can practice virtually before moving on to physical circuit connections. Follow our instagram: @ieee.mtts.ifba.vdc Speaker(s): Felipe Chaves, Room: H403, Bldg: IFBA, Av. Sérgio Vieira de Melo, 3150 - Zabelê, Vitoria da Conquista, Bahia, Brazil, 45078-300

Únase a nosotros en este importante webinar donde abordaremos el proyecto estratégico de interconexión eléctrica entre Panamá y Colombia, una iniciativa clave para el desarrollo energético regional. Durante la sesión, expertos del sector eléctrico de ambos países analizarán: - Los aspectos técnicos y la infraestructura necesaria para la interconexión eléctrica binacional - Beneficios económicos y operativos para ambos países - Impacto en el mercado eléctrico regional - Retos y oportunidades en la implementación del proyecto - Marco regulatorio y aspectos ambientales - Perspectivas futuras para la integración energética centroamericana Speaker(s): , Raquel Ronderos Virtual: https://events.vtools.ieee.org/m/445089

In this lecture, we will discuss the process of tissue regeneration, which has been studied in different lines of research with the aim of optimizing it. We will cover various aspects, such as pathophysiology, risk factors, anti-inflammatory drugs, and chemicals that may interact with healing. Among these resources, there are two methods that have demonstrated efficacy in aiding wound healing: low-intensity LED therapy and the use of natural latex derived from the Hevea brasiliensis rubber tree. We will present the use of organ platforms, which are tissue models on a chip within a microfluidic platform, and simulate the circulation and physiological behavior of the system, utilizing the latest "organ-on-chip" technology (created in his lab). We will discuss how this technology can contribute to our understanding of development, as well as serve as a valuable tool for disease modeling and drug development. Finally, we will show that the use of microfluidic systems by Biomedical Engineering and Biotechnology can serve as an alternative to high-throughput models. Speaker(s): Prof. Suélia Fleury Rosa, Virtual: https://events.vtools.ieee.org/m/449650

In this class, we will cover the fundamentals of microcontrollers, highlighting their differences from microprocessors and exploring their main features and components. Additionally, we will conduct a comparative analysis of the leading prototyping boards, such as Arduino, ESP, and Pico, with a special focus on the Arduino Uno. Finally, we will discuss how this tool can be applied in technical and academic projects. Follow our instagram: @ieee.mtts.ifba.vdc Speaker(s): Joao Furtado, Room: H403, Bldg: IFBA, Av. Sérgio Vieira de Melo, 3150 - Zabelê, Vitoria da Conquista, Bahia, Brazil, 45078-300

Is your startup looking for non-dilutive funding (grants) to boost its growth? This workshop will give you the practical tools to write effective grant proposals that maximize your chances of obtaining resources. Requirements to participate - To ensure that you get the most out of the workshop, your team must have: - A legally incorporated startup or in the advanced process of incorporation - A clear project idea, with a brief description of the problem and the proposed solution within the horizon of the grant award date (having a 12-18 month product roadmap is crucial) - A team of 2-5 people with key roles (strategy, finance, operations) - Basic budget documentation and estimated areas of expenditure Fill out this (https://forms.gle/yf9P1CujVLvruFn19) to provide crucial information to support you better. Although the workshop will be in English, team work in breakout rooms can be in other languages. Speaker(s): Nélida Gómez Virtual: https://events.vtools.ieee.org/m/442665

En conmemoración del día de la sociedad IEEE IES (Industrial Electronics Society), se celebrará el simposio de ciudades inteligentes. Este simposio tiene como objetivo reunir a expertos, investigadores y profesionales de la industria para explorar el futuro de los sistemas industriales en el contexto de las ciudades inteligentes. El evento desarrollará una hoja de ruta integral que describe las áreas de investigación críticas y los avances tecnológicos necesarios para impulsar operaciones industriales sostenibles, eficientes y resilientes en entornos urbanos, centrándose en la investigación aplicada. Co-sponsored by: Universidad de Cuenca Speaker(s): Marcelo Pozo, Robin Rueda Agenda: Room: 102, Bldg: C, Victor Manuel Albornoz, Calle de los cerezos, Cuenca, Azuay, Ecuador, 010110

Es un gusto invitarlos al último Seminario de este año, este próximo viernes 06 de diciembre a las 13h00hrs en nuestro comedor institucional. En esta ocasión contamos con la presencia de la Dra. Carolina Payares-Aspirino, de la Universidad de Norwich (EE.UU). Título: Mejoramiento del Comportamiento de la Resistencia a la Fatiga de las Uniones Soldadas de un Acero Estructural Forjado a través de las Transformaciones de Fases del Metal de Soldadura La soldadura por arco eléctrico MIG genera esfuerzos residuales a tracción en las uniones soldadas, lo que conduce a un deterioro del rendimiento de la fatiga de las mismas. La expansión del volumen del metal de soldadura a altas temperaturas seguida de la contracción durante el enfriamiento induce un estado de tensión residual de tracción local en la junta soldada. En este trabajo de investigación se estudiaron nuevos tipos de alambre de electrodo de soldadura, los cuales pudieron inducir un estado de esfuerzos residuales de compresión local por medio de una transformación martensítica controlada a temperaturas relativamente bajas. También se evaluaron los efectos de la temperatura de transformación y las tensiones residuales en la resistencia a la fatiga de la soldadura del acero estructural forjado A36 con los electrodos de alambres diseñados con diferentes composiciones químicas y el convencional utilizado para soldar este tipo de acero ER70S-3. Los nuevos electrodos de alambres denominados LTTW (soldadura a baja temperatura de transformación) fueron ensayados para caracterizar el efecto de la transformación de fase en la gestión de la tensión residual de las uniones soldadas. Se prepararon uniones soldadas en filete cruciformes sin carga para la medición de tensiones residuales y los ensayos de fatiga. La medición de las tensiones residuales de los tres alambres diseñados reveló una tensión residual de compresión cerca de la punta de la soldadura. Las propiedades de fatiga de los nuevos alambres se mejoran en comparación con el alambre disponible comercialmente ER70-3. Esperamos contar con su presencia este próximo. Les compartimos la liga para su registro: https://forms.gle/TfS3cCX4vjmx2sRK7 [] Que tengan un excelente día. Av. Playa, Av. Pie de la Cuesta 702-No. 702, Desarrollo San Pablo, 76125 Santiago de Querétaro, Qro, Queretaro, Queretaro de Arteaga, Mexico, 76270

The Industrial Engineering Office and the Office of MSc Project Management Programme of The University of the West Indies (UWI) are organising the Fifteenth Public Seminar on “Project Management Practices in the Caribbean” (PM15 Seminar), in collaboration with the Technology & Engineering Management Society (TEMS) Chapter and the Education Society (EdS) Chapter of the IEEE Trinidad & Tobago Section, The IET T&T Local Network, The Association of Professional Engineers of Trinidad and Tobago (APETT), The Society of Caribbean Industrial Engineers (SCIE), and the Caribbean Academy of Science, T&T Chapter (CAS-TT). This seminar will be held in Lecture Room 2, Faculty of Engineering Building Block 13, from 9.00 a.m. to 1.00 pm on Saturday 7th December 2024. This seminar forum is to facilitate the nation-wide awareness and use of best project management practices and related concepts, models and tools in both public and private sectors organisations in Trinidad and Tobago (T&T) and the wider Caribbean. Target audiences are executives, managers, engineers, industry practitioners, academics, students and people who are interested in the Seminar’s theme. You are cordially invited to attend the Seminar. An e-invitation card and an e-flyer of the PM15 Seminar are attached, for your information. Invited speakers will share their practical PM experiences and cases/lessons learnt. Besides, a discussion forum will be held along with the Information sessions made by IET LN TT and IEEE-tt at the seminar. This is a FREE Public seminar. However, pre-registration by Tuesday 3rd December 2024 is recommended due to limited seats. You can simply click the link below and complete the jot form for pre-registration, OR by email to [email protected] If you have any queries regarding the PM15 Seminar, please feel free to contact us or e-mail: [email protected] or [email protected] (Dr. Ruel Ellis) We look forward to hearing from you soon. Co-sponsored by: The Industrial Engineering Office and the Office of MSc Project Management Programme of The University of the West Indies (UWI) Speaker(s): Juliet Romeo-Joseph, Richard Lewis, Issa Grant, Deanna Dookeran, Brent Siboo, Dale Rodney Miller Room: Lecture Room 2, Bldg: Faculty of Engineering Building Block 13, UWI St. Augustine Campus, St. Augustine, Trinidad & Tobago, Trinidad & Tobago

In this meeting, we will define our plans and goals for the upcoming year. We will better outline the roles of each board member and the types of activities we will carry out. Additionally, we will draft plans to establish partnerships, whether with companies or through collaborative events with other chapters. We will also discuss strategies for recruiting new members and ways to encourage them to acquire IEEE MTT-S membership and engage more in our events. To achieve this, we will gather everyone's ideas during the meeting and think strategically. We will analyze our best options to ensure that the coming year is a success and, hopefully, that we are recognized for the work we accomplish. Instagram: @ieee.mtts.ifba.vdc Virtual: https://events.vtools.ieee.org/m/451333

En esta ultima reunión, el director, el mentor/consejero estarán informados de los nuevos estudiantes quien tomara cargo de la rama 2025. Se les dará asesoría por parte de la rama 2024, como usar las herramientas, formatos, etc. Tercer Carril del Ejido Serrano, S/N, Cuanalá, Puebla, Puebla, Mexico, 72640

Campaña de donación de sangre Universidad Don Bosco, Soyapango, San Salvador, El Salvador

The conference has been planned so that participants from academic institutions, researchers, teachers and education professionals take part in the conference and share their experiences on digital transformation in the teaching and learning field. We hope this is a memorable and valuable experience for you, and that you will enjoy discovering the research, insights, practical knowledge, and personal contacts available to you. Many members of the organizing team worked very hard to turn our initial visions for this conference into reality, we would like to warmly thank all organizing committee members for their dedication before and after this unique event. Our final thanks would go to the authors, thanks for your support to our conference. We hope that all participants and other interested readers benefit from and enjoy the presentations and proceedings and also find it stimulating in this process. We pursue higher and better international conference, your suggestions and comments are welcome. Co-sponsored by: Universidad Nacional Autónoma Altoandina de Tarma Speaker(s): Dr. Luis Marqués Molías tarma, Junin, Peru

The conference has been planned so that participants from academic institutions, researchers, teachers and education professionals take part in the conference and share their experiences on digital transformation in the teaching and learning field. We hope this is a memorable and valuable experience for you, and that you will enjoy discovering the research, insights, practical knowledge, and personal contacts available to you. Many members of the organizing team worked very hard to turn our initial visions for this conference into reality, we would like to warmly thank all organizing committee members for their dedication before and after this unique event. Our final thanks would go to the authors, thanks for your support to our conference. Co-sponsored by: Universidad Nacional Autónoma Altoandina de Tarma Speaker(s): Dr. Antonio González Grez tarma, Junin, Peru

In this mini-course, students will create a step-by-step custom library for the DHT11 temperature and humidity sensor using Arduino. The course will cover everything from the fundamentals of the one-wire communication protocol to the complete implementation of the code, including bit interpretation, byte conversion, and checksum validation. By the end, participants will have a fully functional library that can be easily reused in various projects, ensuring reliable humidity and temperature measurements. Follow our Instagram: @ieee.mtts.ifba.vdc Speaker(s): Heitor Rodrigues, Room: H403, Bldg: IFBA, Av. Sérgio Vieira de Melo, 3150 - Zabelê, Vitoria da Conquista, Bahia, Brazil, 45078-300

The conference has been planned so that participants from academic institutions, researchers, teachers and education professionals take part in the conference and share their experiences on digital transformation in the teaching and learning field. We hope this is a memorable and valuable experience for you, and that you will enjoy discovering the research, insights, practical knowledge, and personal contacts available to you. Many members of the organizing team worked very hard to turn our initial visions for this conference into reality, we would like to warmly thank all organizing committee members for their dedication before and after this unique event. Our final thanks would go to the authors, thanks for your support to our conference. We hope that all participants and other interested readers benefit from and enjoy the presentations and proceedings and also find it stimulating in this process. We pursue higher and better international conference, your suggestions and comments are welcome. Co-sponsored by: Universidad Nacional Autónoma Altoandina de Tarma Speaker(s): Dr. Anna Pons Vilaseca tarma, Junin, Peru

[] Ph The Seawaves, Panamá, Panama, Panama

Estimados miembros estudiantiles y docentes de CASS, El Capítulo Profesional IEEE CAS de Panamá desarrollará el taller gratuito Fundamentos técnicos del diseño de circuitos integrados para estudiantes miembros del IEEE y de CASS de la Sección de Panamá o quienes deseen ingresar a la membresía de CAS para fortalecer sus conocimientos en Circuitos Integrados. El taller gratuito se realizará de forma presencial el sábado 14 de diciembre de 2024, Salón Los Anturios del Hotel Crown Plaza, de 8:00am a 4:00pm. El evento cuenta con el apoyo de CASS Outreach Initiative 2024. El taller tiene como objetivo proporcionar a los estudiantes y docentes profesionales una experiencia práctica y conocimientos en el diseño de circuitos integrados. Los participantes participarán en un taller de un día con sesiones interactivas que combinan la teoría y la práctica, lo que les permitirá comprender los principios fundamentales del diseño de los circuitos integrados. La inscripción se puede realizar a través del siguiente enlace con fecha límite del 12 de diciembre de 2024. Programa del Workshop A través de ejercicios prácticos, los asistentes aprenderán los principios básicos del diseño de los circuitos integrados (IC). Además, el taller introducirá el uso de herramientas de diseño (CAD) como (https://8bitworkshop.com/) y (https://wokwi.com/). Los participantes obtendrán información sobre estas herramientas de simulación y diseño para adquirir y mejorar sus conocimientos en Circuitos Integrados de Aplicación Específica (ASIC), Integración de Sistemas muy Grandes (VLSI) y Lenguaje de Descripción de Hardware (HDL). Al final del taller, los asistentes no solo tendrán una base introductoria en el diseño de circuitos, sino que también comprenderán los requisitos y procedimientos y oportunidades de fabricación mediante plataformas como (https://github.com/) y (https://tinytapeout.com/). El evento presencial y gratuito, de un día, se llevará a cabo en el Hotel Crown Plaza, Salón Los Anturios, de 8:00 am a 4:00 pm (GMT-5). Se realizarán presentaciones adicionales sobre la Sociedad de Circuitos y Sistemas CAS del IEEE y los programas de apoyo a la educación y la formación de sus capítulos estudiantiles. Se brindará acceso a Internet inalámbrico, coffee break en la mañana, almuerzo y café/té en la tarde. Los asistentes al curso recibirán certificado de participación impreso al finalizar el evento. [] Co-sponsored by: IEEE CAS R9 Speaker(s): Kelvin Kung, Agenda: Agenda: 8:00 AM: Inicio del taller - Registro - Palabras de bienvenida. - Qué es IEEE e IEEE CASS. Cómo formar capítulos estudiantiles. - Oportunidades de capacitación y becas de IEEE CASS. - Presentación de los participantes. - Importancia del desarrollo del capital humano en materia de circuitos integrados y semiconductores. - Introducción del expositor - Taller: - Fabricación de microchips bajo el proyecto LATINPRACTICE. - Recursos educativos de TinyTapeOut - Fabricando mi primer microchip. 10:00 AM: Coffee Break 10:20 AM: Taller - Diseño con Wokwi - Diseño con HDL - Reconocer las limitaciones técnicas 12:00 PM: Almuerzo 1:00 PM: Taller - Bases de electrónica (para utilizar Wokwi/HDL) - Compuertas lógicas - Tabla de la verdad - Álgebra booleana - Mapa de Karnaugh 2:50 PM: Receso 3:00 PM: Taller - Preparación para la fabricación. - Enviar a fabricar. 4:00 PM: Cierre del evento - Entrega de certificados. Room: Salón Los Anturios, Bldg: Hotel Crowne Plaza Panama, Av. Manuel Espinosa Batista, Panamá, Panama, Panama

The robotics workshop aims to introduce the joungest children to the fascinating world of robotics and Technology. The workshop focuses on simple and practical activities that make learning about robotics attractive and accessible to the youngest children. The workshop includes: - Introduction to Robotics - Building Simple Robots - Introducion to Programming. Co-sponsored by: Universidad Tecnológica de Panamá Agenda: The Agenda includes: - Introduction to Robotics - Building Simple Robots - Introducion to Programming. Comunidad del Rodeo, Corregimiento Los Milagros, La Mesa, Veraguas, La Mesa, Veraguas, Panama

El pasado 17 de Diciembre los estudiantes de la RAMA IEEE ESPE Latacunga en conjunto con la rama (https://www.facebook.com/IEEEUTC?__cft__=AZXk2V7QI8exAQ9HMdqmA9cIxFyUSY2FY9oNr2wK4BbhC0_cWC8NqlW35Y1Gi9-xxGOa9KRqqLXJcgmUdy7O0twYFOHtY-rKPX8eH48wNpdZIODXNtqOwWNnR2X2ftFtRiPuZ9l9BqUjZBk4CxPf_z3bUnY32lWgnQQJVJWL6y41x0riGsClJTRkerdQrBIhxw8&__tn__=-]K-R), llevaron a cabo una visita a la Parroquia Rural de Angamarca. Durante la jornada se realizaron de diversas actividades, como juegos, dinámicas y el pintado de caritas, con el objetivo de proporcionar entretenimiento y disfrute de los niños, niñas y adolecentes de la comunidad. Ademas. se realizó la entrega de donaciones receptadas por cada una de las ramas, dentro de las cuales se incluye, kits de aseo, ropa, alimentos de primera necesidad y fundas de caramelos. Angamarca, Pujilí, Cotopaxi, Ecuador

Prof. Bikash Pal Professor of Power Systems at Imperial College London Abstract The talk will focus on an analytical framework in impedance domain to quantify the interaction between the new plant and the rest of the network for setting additional grid connection study specifications which will include detail technical study to check and mitigate the risks associated with new power electronics interfaced generation. The framework developed is to support MMC technology, control delay, system strength and FRT capability of dynamic voltage support devices and windfarm through technical case study conducted at the research group of Bikash Pal at Imperial College London. Future research challenges and opportunities will be highlighted. Short bio Bikash Pal is a Professor of Power Systems at Imperial College London (ICL). He is research active in power system stability, control, and estimation. Currently he is leading a six university UK-China research consortium on Resilient Operation of Sustainable Energy Systems (ROSES) as part of EPSRC-NSFC Programme on Sustainable Energy Supply. He led UK-China research consortium project on Power network stability with grid scale storage (2014-2017): His research is conducted in strategic partnership with ABB, SIEMENS, GE Grid Solutions, UK, and National Grid, UK. UK Power Networks. SIEMENS R&D collaborated with him to develop fast power flow and volt-var control tools in (https://new.siemens.com/global/en/products/energy/energy-automation-and-smart-grid/grid-control/advanced-distribution-management.html), an advanced module for distribution management system solution from SIEMENS. This is now commissioned in distribution control centres in Columbia, Bosnia Norway and Azerbaijan serving 15 million customers in these countries. He commissioned sequel of projects with him to analyse and solve wind farm HVDC grid interaction problems (2013-2019). Prof Pal was the chief technical consultant for a panel of experts appointed by the UNFCCC CDM (United Nations Framework Convention on Climate Change Clean Development Mechanism). He has offered trainings in Chile, Qatar, UAE, Malaysia and India in power system protections, stability and control topics. He has developed and validated a prize winning 68-bus power (http://www.sel.eesc.usp.br/ieee/NETS68/New_England_New_York_68_Bus_System_study_report.pdf), which now forms a part of IEEE Benchmark Systems as a standard for researchers to validate their innovations in stability analysis and control design. He was the Editor-in-Chief of IEEE Transactions on Sustainable Energy (2012-2017) and Editor-in-Chief of IET Generation, Transmission and Distribution (2005-2012). He is Vice President, PES Publications (2019-2023). In 2016, his research team won the President’s outstanding research team award at Imperial College London (ICL). He is Fellow of IEEE for his contribution to power system stability and control. He is Fellow of The Royal Academy of engineering, UK for the impact of his contribution to the field. He is an IEEE Distinguished Lecturer in Power distribution system estimation and control. He has published about 125 papers in IEEE Transactions and authored four books in power system modelling, dynamics, estimations and control. He was Otto Monsted Professor at Denmark Technical University (DTU) (2019) and Mercator Professor sponsored by German Research Foundation (DFG) at University of Duisburg-Essen in 2011. Co-sponsored by: Departamento de Potencia, Instituto de Ingeniería Eléctrica, Facultad de Ingeniería, UDELAR, Uruguay (https://iie.fing.edu.uy/) Room: 703, Bldg: Facultad de Ingeniería, Universidad de la República, Salón Rojo - 7o piso, Montevideo, Montevideo, Uruguay, Virtual: https://events.vtools.ieee.org/m/444461

Hola, compañero miembro de IEEE Puerto Rico: Queremos invitarte a participar de esta platica sobre el programa MOVE en Puerto Rico. Actualmente estamos buscando voluntarios para apoyar nuestro programa en Puerto Rico, que tengan una profunda pasión por el trabajo humanitario y el tiempo para apoyar este programa. El programa MOVE es uno enfocado en ayudar nuestras comunidades luego de eventos de desastres naturales apoyando organizaciones que proveen asistencia luego de desastres. Utilizando nuestros conocimientos técnicos proveemos apoyo en el manejo de servicios como generación de energía solar, comunicaciones por medio de radios e internet satelital. Si quieres saber más sobre este programa y cómo funciona a nivel global y Puerto Rico, te invitamos a que te conectes a nuestra charla este próximo martes, 17 de diciembre de 2024 a las 7:00 pm (AST). Video call link: (https://calendar.google.com/calendar/u/0/r#:~:text=meet.google.com/bav%2Dooky%2Dwgh) Or dial: ‪(PR) +1 787-333-6333‬ PIN: ‪407 476 415 0348‬# More phone numbers: https://tel.meet/bav-ooky-wgh?pin=4074764150348 Or join via SIP: sip:[email protected] Si quieres conocer más sobre este programa, puedes encontrar más información en este enlace: https://move.ieee.org/ Y para información sobre nuestro equipo de MOVE Puerto Rico, puedes utilizar este enlace: https://move.ieee.org/puerto-rico/ Conoce mas sobre nosotros durante esta charla o contáctanos directamente al correo: [email protected]. Muchas gracias de antemano por tu apoyo a esta iniciativa del IEEE, Francisco Carrero Chair, MOVE Puerto Rico ---ENGLISH--- Hello fellow member of IEEE Puerto Rico: We would like to invite you to participate in this talk about the MOVE program in Puerto Rico. We are currently looking for volunteers to support our program in Puerto Rico, who have a deep passion for humanitarian work and the time to support this program. The MOVE program is focused on helping our communities after natural disaster events by supporting organizations that provide assistance after disasters. Using our technical knowledge, we provide support in the management of services such as solar energy generation, communications through radios, and satellite internet. If you want to know more about this program and how it works globally and on our island of Puerto Rico, we invite you to connect to our talk this coming Tuesday, December 17, 2024 at 7:00 pm (AST) If you want to know more about this program, you can find more information at this link: https://move.ieee.org/ And for information about our MOVE Puerto Rico team, you can use this link: https://move.ieee.org/puerto-rico/ Learn more about us during this talk or contact us directly at: [email protected] Thank you in advance for your support of this IEEE initiative, Francisco Carrero Chair, MOVE Puerto Rico Video call link: (https://calendar.google.com/calendar/u/0/r#:~:text=meet.google.com/bav%2Dooky%2Dwgh) Or dial: ‪(PR) +1 787-333-6333‬ PIN: ‪407 476 415 0348‬# More phone numbers: https://tel.meet/bav-ooky-wgh?pin=4074764150348 Or join via SIP: sip:[email protected] Virtual: https://events.vtools.ieee.org/m/448949

Actividad final de cierre para exponer los resultados del proyecto. Se discutirá entre todos los retos, dificultades, puntos de mejora, errores cometidos, oportunidades de mejora y compartir las diversas opiniones de los intrigantes de los proyectos. Posible continuidad en el futuro, entre otros. LIANA, TEC, Restaurante 2 Chingones o Il Palio Ristorante e Pizzeria, Cartago, Cartago, Costa Rica

Queridos miembros y amigos del IEEE, Nos complace invitarlos a nuestra celebración anual de Navidad, un evento para recordar y disfrutar juntos. ¡No se pierdan esta noche especial! Fecha y Hora: Miércoles 18de Diciembre 7:00 PM Lugar: Hotel Sortis (Obarrio) - Cena Buffet: Disfruten de una variedad de deliciosos platos. - Open Bar: Selección de bebidas para brindar en esta noche festiva. - Tómbola de Premios: ¡Participen y ganen sorpresas increíbles! - Entrega de Reconocimientos: Celebraremos los logros de los voluntarios, incluyendo el reconocimiento al "Voluntario del Año", Manuel Lopez Splá. - DJ: Ven a bailar! Durante la cena, realizaremos un reconocimiento especial a los voluntarios sobresalientes que se han destacado con su labor, y también celebraremos a aquellos que han contribuido a recibir importantes premios para nuestra comunidad. Es una oportunidad perfecta para reunirnos, compartir y festejar juntos el espíritu navideño. ¡Los esperamos para cerrar el año con alegría y buena compañía! Confirma tu asistencia ¡No olvides confirmar tu asistencia! Tu presencia es importante para nosotros. Agradecemos, los pagos se hagan a la cuenta de la sección antes del día del evento para confirmar los puestos. CUENTA CORRIENTE - Banco General - IEEE PANAMA 03-03-01-002461-2 35$ Miembros IEEE $45 No miembros IEEE $30 Estudiantes $65 Pareja ¡Nos vemos allí! Agradecemos, los pagos se hagan a la cuenta de la sección antes del día del evento para confirmar los puestos. Código de vestimenta: Traje de calle / cocktail Saludos cordiales, Junta Directiva IEEE Panamá Agenda: Hotel Sortis, Panama, Panama, Panama

Evento para divulgar as oportunidades de ser sócio IEEE SPS. Room: Auditório reitoria, Bldg: Campus UFPel Anglo, Pelotas, Rio Grande do Sul, Brazil

"Celebrando Trayectorias IEEE" Objetivo del Evento El objetivo principal del evento es reconocer la dedicación y compromiso de los miembros de IEEE por su antigüedad y contribuciones a la sociedad, así como fomentar el intercambio de experiencias entre los asistentes. Este evento busca fortalecer los lazos entre los miembros y promover un sentido de pertenencia en la institución. Detalles del Evento - Fecha: 20 de diciembre 2024 - Horario: 8h00 a 10h00 - Lugar: Sala de grados de la Facultad de Ingeniería Eléctrica y Electrónica de la Escuela Politécnica Nacional. - Duración: 2 horas - Asistentes esperados: 40-50 personas Actividades Principales - Ceremonia de Reconocimiento: - Entrega de certificados y reconocimientos especiales a los miembros de IEEE con mayor antigüedad. - Mención de sus contribuciones más destacadas. - Panel de Experiencias: - Espacio para que los homenajeados compartan sus vivencias y aprendizajes en el IEEE. - Sesión de Networking: - Actividades para fomentar la interacción entre los miembros actuales y los estudiantes interesados en IEEE. Co-sponsored by: Departamento de Electrónica, Telecomunicaciones y Redes de Información EPN Av. Ladron de Guevara E11-253, Quito, Pichincha, Ecuador, 170525

Aprovechando una visita del Prof. Fernando Auat-Cheein (Harper Adams University, Inglaterra) a Chile, nos presentará sobre su investigación. El profesor Auat ha estado involucrado en proyectos de robótica aplicada a la agricultura. En particular, ha trabajado en robots no tripulados para olivares y otros cultivos. Sus intereses de investigación también incluyen SLAM autónomo y planificación de trayectorias. Short bio: Fernando Auat Cheein is currently a Full Professor at Harper Adams University, England, also Honoris Visiting Professor at Heriot-Watt University, Scotland, and Full Professor (on leave) at Federico Santa Maria Technical University. Fernando is currently shaping the Harper Institute of Technology, a research centre focused in providing cutting edge solutions to the West Midlands farming needs. Fernando is one of the co-founders of the AC3E (ANID Basal), has hold several Fondecyt and other ANID grants, and authored more than 110 journal articles. His graduates are currently academics or scientists at Carnegie Mellon University, Pontificia Universidad Catolica de Chile, UC Davis, University of Lincoln, and others. Fernando is an active editor, being part of the editorial board of Computers and Electronics in Agriculture, Biosystems Engineering, Robotica-Cambridge, Journal of Field Robotics, IEEE OJ on Intelligent Transportation Systems and IEEE Transactions on Mechatronics. Although his primary research focus is robotic systems, Fernando is currently focusing his research efforts on remote sensing for sustainability purposes. Fernando is also IEEE Senior Member and in 2024 was included in the Top 2% of scientists according to the Stanford University ranking. Más información: https://www.linkedin.com/in/fernando-auat-cheein-30743a59/ (https://scholar.google.com/citations?user=glxar60AAAAJ&hl=es&authuser=0) [] Co-sponsored by: Universidad de los Andes, Chile Room: R23, Bldg: Edificio del Reloj, Monseñor Álvaro del Portillo 12455, Las Condes, Santiago, Region Metropolitana, Chile